top of page

SPCS

SPCS BC

This is our model that is designed to work with a high end chemical control system. Housed in a NEMA 3R enclosure a simple selector switch and indicator lights. The BC receives feedback from the chemical control and in turn will then cause the pump and motor to operate in a way that maintains the required flow rate of the pool. The BC can be set up as a single pump system, dual pump system, manual alternating pump system, fitted with under voltage/phase loss protection and can have an A/C unit attached for hot environments.

Image by Gentrit Sylejmani
swimming-pool.jpg

SPCS EF

This is our economy model that is designed to work with a high-end chemical control system. Housed in a NEMA 1 enclosure a simple selector switch and indicator lights. The EkoFlex receives feedback from the chemical control and in turn will then cause the pump and motor to operate in a way that maintains the required flow rate of the pool. The EkoFlex is limited to a single pump operation. Options on the EkoFlex are limited to under voltage/phase loss protection and limited PID operation.

SPCS FD

This is our original flagship model. It is designed to stand alone in the pump equipment room. Housed in a NEMA 3R enclosure with touch screen interface and manual by-pass switch. Connected to the flow sensor, heaters, chemical controller and pump motor. The FD takes feedback from these items and will then cause the pump and motor to operate in a way that maintains the required flow rate of the pool. The FD can be set up as a single pump system, dual pump system, manual alternating pump system, fitted with under voltage/phase loss protection and can have an A/C unit attached for hot environments.

Swimming Pool
Image by Jesper Stechmann

SPCS PCS

This is the line of quality variable frequency drives that we represent and are at the heart of our SPCS systems. These drives are state of the art with many features that allow them to be able to follow a signal from a flow transmitter or do stand alonePID function

SPCS SDC

This is our stand alone aquatic controller. The SPCS SDC receives input from a flow tansmitter and then can control the pump motor to bring all of the saving of a full SPCS system using your existing drive [if the drive is capable of following a standard signal]

Swimming Pool
SPCS: Products
bottom of page